As with a lot of things I make, this started with an idea from someone. They had an idea of what they wanted because they saw a picture… Of a paid pattern. Now, I typically stay away from paid patterns on general principal, but I had a weak moment. I bought the rather pricey pattern… I knew I shouldn’t, but I did. It was absolutely dreadful! It had good reviews and was written decently, but I found it just awful. It was made of motifs that you connected as you went… OK, I can do that. However when you did connect them it left gaping holes in the pattern and did not look like scales at all! Just not for me… so here is what I came up with after I got rid of that hideous attempt.
Measurements:
Tail to top 42 inches
Tail to tip of fin 12 inches
Top width 38 inches
size H hook
worsted weight yarn: The best estimate I have on how much I used until I duplicate this more is a total of 1600 yds. Now the one pictured I used Bernat super value (426 yds per skein) in lilac and light damson. Then the variegated yarn was 2 skeins (since they come in 275 yd skeins) in fresh lilac. As always though everyone can use different amounts of yarn depending on how tight or loose you crochet. Please err on the side of having extra yarn. As I have made more this is roughly accurate. Notice though I find I need extra yarn of the two solid colors (not just one skein of the super value) and so I can do a two stranded fin.
Edit: So I’ve been grabbing 2 skeins each of the solid color and 2 of the variegated yarn. I swear every time I make this I have different amount of yarn leftover… The last two I’ve made the fin out of the solid colors because the variegated almost ran out. The solid colors I am left with over a half of one and all over 3/4 of the other… Trying to get down the yardage for this has been tearing my hair out. The yarns are not exactly the same is my thought.
Also for those who need to resize the pattern, Rachel Z. Commented this:
“Thanks for the great pattern. I just finished a child size one and I’ve seen a lot of request for the modifications… my top chain was 128 (includes 2 turning chains). If you work in multiples of 6 and add 2 for turning, it always works out. I did 42 5dc rows then joined it together. After joining, I did 15 5dc rows. When reducing to a 3dc pattern, I followed the remaining instructions until I had 14 st at the close. I made the same fin, which the top reduces to 7 st and it attaches to the tail perfectly. I hope this helps others wanting to make a child sized blanket :)”
Also for those with problems understanding the crochet language a fellow hooker named HAB posted this: “For instructions of terminology you don’t understand, use Google search engine to ask or go to a yarn website and search for abbreviations. At the very least buy a basic crochet book. sctog = single crochet two together. http://www.lionbrand.com/faq/
For Knit and Crochet abbreviationshttp://www.lionbrand.com/cgi-
This free pattern is written by someone who is not a professional pattern writer. I applaud her efforts. To understand how she writes her pattern requires being very familiar with crochet terminology and patterns in general. Or locating instructions/terms unfamiliar to you in a crochet book or online crochet information source. Here is a great one:http://www.craftyarncouncil.
To help you decipher her instructions I suggest you copy and paste into a word processor and then begin labeling rows and rounds. Make sure you understand *the stitch pattern* (the crocodile stitch) as noted in the first paragraph following the initial chains: *sc in first dc, sk 2 dc, 5 dc in next, sk 2 dc* (this makes what I will call 5dc (stitch) pattern for the rest of the (mermaid) pattern) My (stitch) pattern ended on a sc. ch 2 and turn”
Note on the color changes. I started changing color after the first 5dc pattern row and changed color after each row. Being that I was using 3 different yarns that made things easier and less ends to weave in because I never bound off at the end of the row. I simply dropped one color, picked up the next and went. Now, I did NOT carry behind the work. I truly just let it stay there. Believe it or not, it works and doesn’t mess up the color pattern you are doing. After you have all three colors joined in you will see that when you end a row you just pick up the strand you had left before. Sounds so much more difficult than it really is, but so much a time saver not having to weave in all those ends.
Also note. Your work might not be the exact same counts as mine. That’s cool. It might end on a sc where I had 3dc. That’s cool. It is really just that 5 dc shell pattern you want for the scales. If your row ends on a sc, ch 2 turn, 2dc in first then go with the pattern. If your row ends on a dc group, sc in last st, ch 1 turn and sc in first the go with the pattern. It is really simple once you get used to it.
To start, ch 153 (this gave me the width I was looking for, so if you are altering for a different size start with a chain that works for your project)
dc in third chain and across, chain 1
*sc in first dc, sk 2 dc, 5 dc in next, sk 2 dc* (this makes what I will call 5dc pattern for the rest of the pattern) My pattern ended on a sc. ch 2 and turn
2dc in first st (that last sc), sk 2 st, sc in the 3rd dc of the 5 dc shell, sk 2 st, then follow the 5dc pattern until last sc where you only do 3dc, ch 1 and turn
sc in first st, sk 2 st, then follow the 5dc pattern until the end where you sc in that last st/dc. ch 2 and turn
Now you just do those last two rows for 72 5dc pattern rows. This made the lapghan go down to about the calf length (in case you are re-sizing the pattern).
Now we are going to start going in rounds instead of rows. How you might ask? Very carefully… Make sure when you pull the ends together the right side of the first row of dc is facing out. Or not, either way would be fine I imagine honestly. Just keep the strands of the none working yarn to the back/inside of the tail and change colors where it looks best to you.
What follows is how I brought the two sides together so I could work more of a spiral because that made things easier on me and doesn’t leave a seam. Truly, you could just do what makes sense to you as you look at the work in your hands. As long as you are still doing the 5dc pattern, it will all be good. Just relax and have a drink and go with it.
Sl st to the 1st dc of the row, ch 1, sc in joining, then proceed on with 5 dc pattern.
Sl st to 1st sc, changing colors, ch 2 and 4dc in same as join. 5 dc pattern to last sc. Now sc tog last sc to the 2nd dc from the beginning, make sure to change color.
Ch 1, sc in same as join then go on with the 5 dc pattern.
From here you should be able to just go in a spiral, changing colors as you get back to the start of the spiral. I did a total of 20 rounds counting from the beginning of the original join. This took the me down to about covering the foot when the foot is pointed.
Now you get to start bringing it in to a close. So that means you are almost done!
Keep doing the pattern and color changing around, but instead of the 5dc, do only 3dc, still skipping 2 stitches. On the 2nd, 3rd and 4th round only sk 1 st in-between the dc and the sc. Do this for a total of 4 3dc pattern rounds.
Then you are going to 3dc, sc tog (tog is also known as a decrease) where the next 2 sc would go (in the 2nd dc of the 3 dc group). Do your 3dc pattern until every 3rd sc spot, then sc tog.
Next round, change colors in the first sc spot, 3dc then sc tog (in the 2nd dc of the 3 dc group). Do your 3dc patten until every 3rd sc spot, then sc tog.
This next round 3dc, sc tog over the next 2 sc spot. Do your 3rd dc patten until every 3rd sc spot, then sc tog.
This should leave it almost closed up and you tired of turning your work around and around. So go ahead and change colors in the first sc, then sc tog where every sc spot should be for 2 rounds.
Bind off, and leave a tail so you can go ahead and sew the tail closed.
Join your yarn on the outside of the opening where you joined the rounds and sc around the opening. Placing 3 sc in the corners. Bind off and weave in the end.
Feels great to be done with that part doesn’t it? Now on to the much easier to do fin. Again, I sized it for the lapghan I was working on.
Fin
I did the fin in the variegated yarn. If you want a thicker fin, use two strands held together. The fin shape will have a straight side with the opposite side decreasing in, then increasing back out. The straight side will be the top where you do your sc tog to then sew it on the tail.
Another option on the tail can be found here (https://handcraftsofjoy.com/2015/10/14/handcrafts-of-joys-mermaid-tail-fin-pattern/) it works up well and it is a bigger version of what I did.
Ch 43
dc in 4th chain and dc across, ch 2 and turn
*dc tog, dc in rest of stitches, ch 2 and turn
dc across, dc tog in last two dc, ch 2 and turn*
repeat this pattern for a total of 5 times
now do 2 dc tog, dc in rest of stitches, ch 2 and turn
dc across and do 2 dc tog in last 4 st, ch 2 and turn
2 dc in each of the next 2 st, dc across, ch 2 and turn
dc across, put 2 dc in each of the last 2 dc, ch 2 and turn
*2 dc in first dc, dc across, ch 2 and turn
dc across, 2 dc in last st, ch 2 and turn*
repeat this pattern for a total of 5 times
dc across, ch 1 and turn
sc around, making sure to put 3 sc in the corners except the last corner you come to. Ch 1 and turn so that now you are working on the top of the fin (where you just have a bunch of dc, not the dc tog or 2dc)
sc tog across, ch 1
sc tog across, ch 1
*sc tog, sc* ch 1
*sc tog, sc * ch 1
bind off, leaving a long tail for sewing.
Now you are going to sew this where the bottom of your fin is… where you sewed it close. It is worth noting that I sewed the sides of the sc rows to the tail as well as the sc. I thought it looked better and helped hold the fin out.
There you have it… a cozy mermaid tail!
Mad Hooking!
773 comments on “Adult Sized Mermaid Tail Lapghan”
Comments are closed.
13 Pings/Trackbacks for "Adult Sized Mermaid Tail Lapghan"
[…] Free Pattern! […]
[…] Click here for your FREE mermaid lapghan pattern! […]
[…] Free Mermaid Tail Crochet Pattern Free Mermaid Tail Crochet Pattern Free Mermaid Tail Crochet Pattern Free Mermaid Tail Crochet Pattern […]
[…] Stay relaxed while enjoying book-reading by laying half down on a couch! The mermaid tail blanket will hold your legs tight but in a comfortable way and will lay smoothly across your lap! A fashion-worthy and cute winter accessory to get the necessary amount of warmth in chilly days! madhooker […]
[…] it. This can be a great gift for your family or friends too. Thanks for Mad hooker for the free mermaid lapghan pattern. Also enjoy mermaid tail blanket […]
[…] Get free pattern->Adult Sized Mermaid Lapghan […]
[…] mad hooker […]
[…] like a mermaid, what is there not to love?! So, in November I decided to make my own. I opted for Mad Hooker‘s free crochet pattern, because it looked straightforward and I’m a faster crocheter than […]
[…] madhooker […]
[…] Click below link for free pattern: Source: Adult Sized Mermaid Tail Lapghan | Mad Hooker Crochet! […]
[…] madhooker […]
[…] madhooker […]
[…] madhooker […]